Version 3.07
| Optidrive P2 User Guide |
33
www.invertekdrives.com
5
K
eypad and Display Operation
5. Keypad and Display Operation
The drive is configured and its operation monitored via the keypad and display.
5.1. Keypad and Display Layout
Control Keypad provides access to the drive parameters, and also allows control of the drive when Keypad Mode is selected in P1-12.
IP20, IP55 & IP66 models keypad with TFT display
Main Displayed Parameter
Shows the drive status or the value of
whichever of the selectable parameters is
currently being shown on the main display.
Operating Information
Provides a real time display of key operating
information, e.g. output current and power.
Quick Help Button
Provides access to short
description of the displayed messages.
F1 Button
Functional Button which can be programmed
only in internal PLC function block.
Start Button
When in Hand mode, used to Start the drive.
Stop / Reset Button
Used to reset a tripped drive.
When in Keypad mode, used to Stop the
drive.
P2 01
Drive Address
Drive serial communication address set
in parameter P5-01.
Navigate Button
Used to display real-time information,
to access and exit parameter edit mode
and to store parameter changes.
F2 Button
Functional Button which can be
programmed only in internal PLC
function block.
Up Button
Used to increase speed in real-time
mode or to increase parameter values
in parameter edit mode.
Down Button
Used to decrease speed in real-time
mode or to decrease parameter values
in parameter edit mode.
STOP
37kW
400V
3Ph
F1
F2
5.2. Selecting the Language on the TFT Display
P2 01
Select Language
Select Language
STOP
Español
Deutsch
English
Español
Deutsch
English
15kW 400V 3Ph
Hold down the Start
and Up keys for >1s.
Use the Up and Down
arrows to select a
language.
Press the Navigate
button to select.
