22
Operation & Maintenance Manual
Cyclo® HBB
Cyclo® HBB
Lubrication
Determining Lubrication Method
Sumitomo Cyclo® HBBs are shipped from the factory
without
lubricating oil, unless the customer specified otherwise when the
unit was ordered
For some unit sizes and mounting configurations, the Cyclo® portion is filled at the factory with
maintenance-free grease
For
these units, the Cyclo® portion
does not
need to be filled with lubricant before start-up Refer to the Lubrication Method section
for details
The unit must contain the correct type and amount of lubrication before operating
For the Cyclo® HBB, the Cyclo® and the helical gear portions
must
be filled with lubricant separately and maintained separately
Lubricant
does not
flow from one section to the other
Unit Nomenclature
Refer to the
Model
portion of the unit’s nameplate to determine the unit size, reduction ratio, and mounting configuration:
Cyclo® Portion
Helical Gear Portion
Separate
Lubrication
Reduction Ratio (nominal)
Unit Mounting Configuration
E H Y J -
Z 6 0 9 5
Y -
Y 1
-
2 1
Helical Gear Size
Cyclo® Size
Summary of Contents for Cyclo HBB
Page 1: ...0 7 6 0 1 6 0 0 0 3 H B B O M2 0 1 8...
Page 27: ...MA X MI N...
