Splice conditions
Page
Splice condition
Details
SM : 1c
Can be used for splicing single-mode single fiber (ITU-T G.652).
SM : 2c
Can be used for splicing single-mode 2-fiber ribbon (ITU-T G.652).
SM : 4c
Can be used for splicing single-mode 4-fiber ribbon (ITU-T G.652).
40
SM : 6c
Can be used for splicing single-mode 6-fiber ribbon (ITU-T G.652).
1/5
SM : 8cQck
Can be used for splicing single-mode 8-fiber ribbon (ITU-T G.652).
“SM: 8cQck (Quick)” enables to perform a splice faster than “SM:
8cStd (Standard)”.
SM : 8cStd
SM : 10cQck
Can be used for splicing single-mode 10-fiber ribbon (ITU-T G.652).
“SM: 10cQck (Quick)” enables to perform a splice faster than “SM:
10cStd (Standard)”.
SM : 10cStd
2/5
SM : 12cQck
Can be used for splicing single-mode 12-fiber ribbon (ITU-T G.652).
“SM: 12cQck (Quick)” enables to perform a splice faster than “SM:
12cStd (Standard)”.
SM : 12cStd
MM : 1c
Can be used for splicing multimode single fiber (ITU-T G.651).
MM : 2c
Can be used for splicing multimode 2-fiber ribbon (ITU-T G.651).
MM : 4c
Can be used for splicing multimode 4-fiber ribbon (ITU-T G.651).
3/5
MM : 5c
Can be used for splicing multimode 5-fiber ribbon (ITU-T G.651).
MM : 12c
Can be used for splicing multimode 12-fiber ribbon (ITU-T G.651).
DSM : 1c
Can be used for splicing dispersion shifted single fiber (ITU-T G.653).
Can be used for splicing dispersion shifted 2-fiber ribbon (ITU-T
G.653).
DSM : 2c
Can be used for splicing dispersion shifted 4-fiber ribbon (ITU-T
G.653).
DSM : 4c
4/5
Can be used for splicing dispersion shifted 8-fiber ribbon (ITU-T
G.653).
DSM : 8c
Can be used for splicing dispersion shifted 12-fiber ribbon (ITU-T
G.653).
DSM : 12c
Can be used for splicing non-zero dispersion-shifted 12-fiber ribbon
(ITU-T G.655).
5/5
NZDS : 12c
Heater conditions
The heating conditions are optimized for Sumitomo protection sleeves. Select an
appropriate heater condition for the protection sleeve you are using.
Page
Heater condition
Details
Can be used for heat shrinking 60mm protection sleeves for single
fiber with 0.25mm coating, for example, Sumitomo FPS-1.
60mm 0.25 FPS-1
Can be used for heat shrinking 60mm protection sleeves for single
fiber with 0.9mm coating, for example, Sumitomo FPS-1.
60mm 0.9
FPS-1
Can be used for heat shrinking 40mm protection sleeves for single
fiber with 0.9mm coating, for example, Sumitomo FPS-40.
40mm 1c
FPS-40
1/1
Can be used for heat shrinking 40mm protection sleeves for up to
8-fiber ribbon, for example, Sumitomo FPS-5.
40mm 4c/8c FPS-5
Can be used for heat shrinking 40mm protection sleeves for up to
12-fiber ribbon, for example, Sumitomo FPS-6.
40mm 12c FPS-6
Summary of Contents for TYPE-66M12
Page 67: ...57...