S One
User’s Manual
Introduction
1-3
FIG 1-1
1-1
EXAMPLE OF PROPERLY GROUNDED PLUG-SOCKET COMBINATION
The power supply detects the line voltage and switches automatically between 100V and 240V.
WARNING:
The built-in power supply operates at hazardous voltages capable of
causing serious injury or death. Unplug the equipment when not used for an
extended period.
Fuse Rate: T2A H250V.
WARNING:
Before changing the fuse(s), make sure that the cutter is completely
disconnected from its power source.
WARNING:
For continued protection against the risk of fire, replace only with the
same type and rating of fuses.
1.1.4
Electrical shock hazard
1.1.4.1
Grounding (“Earthing”)
WARNING:
The wall sockets, into which the cutter is plugged-in, must be of the
grounded type. The grounded conductors, serving the wall socket, must be properly
connected to the ground.
For emergency access, the cutter should be installed near the socket-outlet for
easy access.
1.1.4.2
Operating voltage
