S One
User’s Manual
OPOS
3-8
If the same graphic design has been printed on a roll with equal distance between these
graphics, this feature can be used.
1.
Power on the cutter and load the media.
2.
Press Settings.
3.
Scroll down with the arrow
and press Configuration.
4.
Scroll down with arrow
and press Recut offset.
5.
Press the arrow up or down
to change the value or just
change the value.
6.
Press
to confirm the recut
offset value.
7.
Press
to get online
again.
8.
Make the first copy as you would make a normal OPOS job.
The cutter will stop after the first contour has been cut and will come online again.
S1D160
50000 x 145 mm
Knife
700 mm/s
90 g
Configuration 1
LAN 192.168.10.2
FlexCut
Tool
Actions
Settings
Calibrations
Configuration
Factory defaults
Autoload
Recut offset
Configuration
Language
Menu units
OPOS Parameters
1 2 3 0
4 5 6 .
7 8 9 C
40
40
mm
Recut offset
1 2 3 0
4 5 6 .
7 8 9 C
40
40
mm
Recut offset
Factory defaults
Autoload
Recut offset
Configuration
Language
Menu units
OPOS Parameters
Tool
3.3.2
Cutting multiple copies of a graphic on the same roll
NOTE:
The distance between the multiple copies should be at least 30 mm.
