SummaCut cutter
User’s Manual
Basic Operation
2-2
2.1.1
Control Panel
2.1.1.1
The menu key
The
MENU
key is
used to reach the most common menu items of the cutter quickly. A last
menu item in the row gives access to a submenu with which all the other functions of the
cutter can be reached (see section 2.3).
2.1.1.2
The exit key
The
EXIT
key (cancel key) cancels the current operation
Pressing this key when the cutter is cutting stops the current job.
2.1.1.3
The enter key
The
ENTER
Key (confirm key) confirms a selected menu or a changed menu item.
As long as this key is not pressed a changed value of a menu item is not saved internally and
can will be lost if the menu is left.
2.1.1.4
The test key
If there is a certain test routine in a submenu, then it can be activated to start it.
The test key can also be used to set the cutter offline during a job and check the result with
the jogging keys. Press the
key to go online again.
2.1.1.5
The jogging keys
,
,
and
The use of the jogging keys varies according to the operation in progress.
For example, when working with different submenus, the
or
jogging key is used
to select the next or previous submenu.
When in a submenu the values can be changed by pressing
or
.
When the cutter is normal operation, then by pressing either one of the jogging keys, the
origin can be changed.
Summary of Contents for SUMMACUT
Page 1: ...User s Manual Rev 004...
