SummaSign Pro SL D-series Cutters
User’s Manual
General Information
1-7
1.2.5
FIRMWARE
Languages
DM/PL, HP-GL, and HP-GL/2
(with selectable origin HP7475 and HP 7580/7585)
Supported character sets
Standard ASCII
Supported fonts
Sans serif (single stroke & medium)
ROM-based plots
Confidence plot, DIN plot
TABLE 1-5:
SUMMASIGN PRO SL D-SERIES FIRMWARE
1.2.6
PERFORMANCE
Specifications for cutting on 0.05 mm (0.002") wax-backed vinyl having a total
media thickness not greater than 0.25 mm (0.010").
Axial speed
50 to 1000 mm/s
2 to 40 ips
Default speed
800 mm/s
32 ips
Acceleration
3 G
3 G
Addressable resolution
0.025 mm, 0.1 mm
0.001", 0.005"
Default resolution
0.025 mm
0.001"
Mechanical resolution
0.0127 mm
0.0005"
Accuracy
0.2% of move or 0.25
mm, whichever is
greater*
0.2% of move or 0.010",
whichever is greater*
Knife pressure
0 to 400 gr.
0 to 400 gr.
Pen pressure
0 to 400 gr.
0 to 400 gr.
Pouncing pressure
0 to 400 gr.
0 to 400 gr.
*Excludes differences due to media expansion, stretching, etc.
TABLE 1-6:
SUMMASIGN PRO SL D-SERIES PERFORMANCE
1.2.7
CERTIFICATIONS
CE Certificate
FCC Class A
Complies with UL 1950, CSA 950
