SummaSign Pro SL T-series Cutters
User’s Manual
General Information
1-17
FIGURE 1-5:
NOSE PIECE INSTALLATION
3.
Gently insert the knife into the tool shaft as shown in Figure 1-5. Hold the
nose piece in place with one hand and, with the other hand, turn the knife
holder counterclockwise until the alignment pin fits into the small notch of the
tool shaft. Now turn the knife holder clockwise until its threads take hold inside
the tool shaft.
FIGURE 1-6:
KNIFE HOLDER INSERTION
4.
Holding the nose piece in place with one hand, adjust the knife depth
with the other hand by turning the knife holder clockwise until the knife tip
is just visible from under the nose piece as shown in Figure 1-7.
