SummaSign Pro T-series Cutters
User’ s Manual
Operation
2-3
When using the MULTIPLE RECUT FUNCTION the different copies will be cut in the
media in such a way that there is only a minimal loss of media. The distance
between the copies can be changed (See Section 2.4.18).
2.1.3. THE ON LINE KEY
The key (ON LINE) toggles between on line and off line operation. When the
key is pressed, the selected mode (ON LINE or OFF LINE) is displayed on the
LCD.
Selecting OFF LINE will suspend all operations in progress. Pressing the key
while the cutter is off line will make the cutter go on line again, resuming the
suspended operation.
While the cutter is off line, the following operations can be performed:
•
Press the
or
jogging key to move the tool carriage to the left or
right.
•
Press the
or
jogging key to make the media move forward
(towards you) or backward (away from you). Moving the media forward
will prove to be very practical when you require to cut the finished sign off
manually.
•
Press the
key (TOOL UP/DOWN) to lower or raise the active tool. If the
tool is not moved for approximately eight seconds, it is raised
automatically.
2.1.4. THE MENU KEY
The
key (MENU) is used to select one of the menus. Pressing the
key will
make the cutter go off line and suspend all operations in progress. Pressing the
key repeatedly will display the different menus one by one. As the menu
options are on a loop, pressing the
key when the last option is displayed
will automatically return you to the first option.
Summary of Contents for T1010 Pro
Page 1: ......
