SummaSign Pro T-series Cutters
User’ s Manual
Operation
2-27
2.6. SYSTEM TESTS
The SYSTEM TESTS menu is a special set of procedures which are not required for
normal cutter operation. Field service personnel, however, will use the SYSTEM
TESTS menu occasionally. When in SYSTEM TESTS, the cutter is fully operational
and performs as described in this manual.
2.6.1. LANGUAGE
The MENU LANGUAGE submenu is used to set or modify the dialogue language
on the LCD. Press the
or
jogging key until the desired language is
displayed on the LCD and press
to confirm.
The information on the LCD can be displayed in English, French, German,
Dutch, Spanish or Italian.
2.6.2. ROM REVISION
Selecting the ROM REVISION option, by pressing the
key will furnish the
details on the cutter’ s ROM revision. This information is often helpful to
technicians when diagnosing problems over the telephone.
2.6.3. SERVICE PLOT
The SERVICE PLOT provides information about the cutter, which is helpful when
requesting service for your cutter. The SERVICE PLOT is always plotted at the
same size and should be performed with a pen on paper.
The plot shows the cutter model number, the revision numbers of the installed
ROM (Read Only Memory) circuits, the selected baud rate, the resolution and
buffer (memory) size.
CAUTION
The following test routines are normally restricted to Summa Field
Service Personnel.
Summary of Contents for T1010 Pro
Page 1: ......
