Contour Cutting
5.1
5. Contour cutting on the SummaSign Series cutters
5.1
INTRODUCTION
The SummaSign Series cutters have accurate alignment methods to
guarantee precise contour cutting.
Depending on the selected alignment method, the cutters can
counterbalance the following irregularities:
1.
ROTATED DESIGN : If the printed design is not loaded straight into the unit,
the contour can be rotated equally to fit the printed graphic.
2.
SKEWED DESIGN : If the X and Y axes of the printed design are not
perpendicular, the contour can be skewed to fit the printed design.
3.
INCORRECTLY SCALED DESIGN : If the print size is different from the original
design in your software due to media expansion or shrinkage, or due to
printing inaccuracies, the contour can be scaled to fit the printed graphic.
Summary of Contents for T1010 Pro
Page 1: ......
