★☆
Note: Once you have select HDD Image, the Reading Source will be automatically set in HDD. If you would like to make Disc –to- Disc
Copies, then you have to go back to 8.Select Source and select DVD-ROM as your Reading Source.
12.2 Disc => Image
This function will guide you to load your master source disc onto the Hard Drive and save as an image
file.
①
.
Place Master Source Disc onto any Drive,
②
.
Select 12.2 Disc -> Image and press
ENT
☆
Note: The source disc can be placed in any Reader or any one of the Writer Drives
.
12.3 Set Reader Speed
This function will guide you to set the Reading Speed of reading the master source disc
.
★☆
Note: this function is ONLY available when loading Source Disc to HDD
12.4 Show Image Info.
This function allows you to check image file information of Image file number, Disc type, and its file size.
3875MB DVD disc
image file A001
CD disc image with 65
min 28 sec, file name
A003
[Disc ==> A001]
10% 446MB
** The source disc loaded to HDD as
image file A001
[Image Manager]
2. Disc => Image
Press
ENT
[Disc ==> A001]
Finished
!
Press
ENT
01 [A001]
DVD 4469MB
[Image Manager]
4. Image Info.
01 [A001]
DVD 3875MB
02 [A003]
CD 65:28
[Image Manager]
3.Reader Speed