Important Safety instructions
Please be aware of the following installation and operation precautions.
1.
Read these instructions - All the safety and
operating
instructions should be read before
use of
this system.
2.
Keep these instructions -
The safety and operating
instructions should be retained for future reference.
3.
Heed all warnings -
All warnings on the system and in
the operating instructions should be adhered to.
4.
Follow all instructions -
All operating and use
instructions should be followed.
5.
Do not use this system near water -
for example,
near a bathtub, washbowl, kitchen sink, laundry tub, in a
wet basement or near a swimming pool, etc.
6.
Clean only with a damp cloth.
This system should be
cleaned only as recommended by the manufacturer.
7.
Install in accordance with the manufacturers
instructions. Do not block any of the ventilation
openings.
For example, the system should not be situated
on a bed, sofa, rug, or similar surface or placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
8.
Do not install near any heat sources
such as
radiators, heat registers, stoves, or other products that
produce heat.
9.
Do not defeat the safety purpose
of the grounding-
type plug. A grounding type plug has two blades and a third
grounding prong. The third prong is provided for your
safety. When the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete
outlet.
10.
Protect the power cord
from being walked on or
pinched particularly at plugs, convenience receptacles, and
the point where they exit from the system.
11.
Only use attachments/accessories
specified by the
manufacturer.
12.
Use only with a cart,
stand,
bracket, or table specified by the
manufacturer, or sold with the system.
When a cart is used, use caution
when moving the cart/system
combination to avoid injury from tip-
over.
13. Unplug this system
during lightning storms or when
unused for long periods of time.
14.
Refer all servicing
to qualified service personnel.
Servicing is required when the system has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled on, been exposed to moisture or
extreme heat, does not operate normally, or has been
dropped.