Below is a quick reference chart of the functions available on the SummitPro DVD Duplicators.
1.
COPY
Copies the master CD/DVD. All contents of the master disc will be duplicated on
to all target disc(s) simultaneously.
2.
TEST
Simulates the copy process, but no data is recorded onto the blank disc(s).
Note:
Test mode can only be done with DVD-R and CD-R media only.
3.
COPY & VERIFY
Copies the master CD/DVD, and then verifies the presence of data on the copied
disc(s) to ensure readability of the copied disc(s).
4.
COPY & COMPARE
Copies the master CD/DVD, and then immediately follows the copy process with
a bit-for-bit comparison between the master disc and copied disc(s) to ensure
exact duplication.
Note:
The “Compare” function cannot be used with audio CDs.
5.
VERIFY
Verifies the presence of data on the copied disc(s) to ensure that the copied
disc(s) can be read back.
6.
COMPARE
Verifies the presence of data on the copied disc(s) to ensure that the copied
disc(s) can be read back.
7.
SET BURN SPEED
Allows the speed settings to be changed for various formats
8.
SELECT SOURCE
Allows the source drive to be changed to any of the available drives in the
duplicator, including the Hard Disk Drive (HDD).
9.
TRACK EDIT
Allows for the selection of individual track(s) from different master audio CDs to
create custom compilation.
9.1 COPY TRACK
Allows the selection of individual track(s) from the master CD and copies the
selected track(s) onto all target discs.
9.2 CLOSE DISC
Closes the target discs when all of the track(s) are burned on to all target discs.
Note:
The copied disc(s) will NOT play back without this step. Do NOT skip this
step.
9.3 DISC INFO
Displays the information regarding the track(s) on the disc(s) and how much
space is remaining on the target disc(s).
10.
UTILITY
10.1 PRE-SCAN
Performs a scan on the master disc before the copy process starts and ensures
the master disc can be copied in the duplicator.
10.2 QUICK ERASE
Erases all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL).
10.3 FULL ERASE
Erases all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL).
10.4 EJECT ALL DISCS
Ejects all disc trays, including source drive.
10.5 DISC INFO
Displays basic information of the discs inserted, such as disc type, amount of
data on disc for master disc(s) (in MB) and media book type. For blank media,
displays the media book type, available space and speed of the media.
10.6 DRIVE INFO
Displays information of all drives in the duplicator including the Reader, HDD (if
present) and Writer drive(s).
10.7 SYSTEM INFO
Displays the duplicator controller information, such as the hardware version,
10.8 UPDATE BIOS
Updates the firmware for the controller.
Note:
Please make sure that the firmware is approved by the manufacturer and
compatible with the duplicator before performing the update.
10.9 COPY COUNT
Counts the number of successful and failed copies of CD and DVD made by the
duplicator.
Menu Overview
