Window Insert
1. Place one hinge on the inner part of the top of the window. The rounded part of the hinge
should sit above the outer edge of the window. Secure the inner piece into position using 2 x
25 mm screws. Repeat.
2. Place the window into the aperture. Secure the window to the panel using 3 x 25 mm
screws per hinge.
3. Open the window and fit a further 2 x 25 mm screws per hinge.
4. Fitting the casement stay. Place the casement stay centrally on the inside of the window.
Place the two pins under the casement stay. Position so that it is not resting on the
framework of the panel and not so high that the pins are of no use.
5. Secure the casement stay on the window using 2 x 25 mm screws.
6. Mark where the pins will be placed.
7. Secure into position using 2 x 25 mm screws per pin.
Our Help Line provides support and advice to customers of Summer Garden
Buildings after ordering. For advice before you buy you can phone us free 7 days a
week on 0800 9777828 or visit www.summergardenbuildings.co.uk