The 6x8 Greenhouse185
Tubular eaves braces
For extra strength and stability you will have to
attach the eaves braces. This is simply done by
using the pre-loaded bolts in both the roof
glazing bars and the side glazing bars. Position
the brace so the flat ends fit comfortably on the
glazing bars, push the bolts through the holes
and tighten with the nuts. Repeat as necessary.
F
DOORS, VENTS & FINISHING
Cutting the cover to
fit over the door
Note: When fitting the bar capping strips on
both the plain and door end, it is advisable you
measure and cut the strip at the same angle as
the gable. This will ensure a neat finish and
enable the roof strip to fit perfectly.
Your greenhouse is almost complete, just a few
sections to go.
Door Assembly
Identify and roughly layout on the ground the
door components:
1 x Left hand - right hand- stile
1 x Left hand - left hand- stile
1 x Right hand - right hand- stile
1 x Right hand - left hand- stile
2 x Door top rails
2 x Door bottom rails
2 x Door Middle rails
1 x Centredoor stop
1 x Inner door track
1 x Outer door track
Clipping the two
pieces of door tracking
2 Handles
Lock and keys
Nuts and Bolts
Glass
First identify the
outer and inner
door tracks and the
centre door stop.
Fix centre door stop to inner door track ensuring
the centre door stop points upwards, click the
two pieces of door track together, use 2 x 10mm
bolts in the holes near the end. Next fix this
track to the greenhouse door track support using
nuts and bolt.
14
Summer Greenhouses 0800 9777 828
