If the flame has yellow tipping, the air shutter should be turned counter clockwise allowing
more air in. This will stabilize the flame. Make sure to tighten the screw after adjustments are
made. Remove the front panel as shown (Page 17) in the diagram to access the burner
front (air shutter).
In order to provide gas to the burner, the orifice must be inside the burner venture
opening. Check to ensure that the burner is properly secured at the front and back.
Lighting Instructions
Before Lighting:
Check gas line/hose for signs of wear, abrasion or cuts. If evidence of
deterioration is
visible, replace the part prior to use.
If you smell gas, check for leaks. If odor continues, immediately call for service.
Keep your face and body away from the grill top when lighting.
Grill and Rotisserie Burner Lighting
1. Open lid before lighting. Make sure all burners are in the
‘OFF’ position.
2. Push and turn burner knob to ‘HI/IGN’ position.
3. Turn stowly allow gas to fill burner.
4. Continue step 3 untill you have burner ignition.
Operation
DO NOT LEAVE YOUR GRILL UNATTENDED WHILE IN OPERATION.
Grill: Grill burners are controlled individually with a control knob. After lighting, turn the
knob to HI, LO or in between as desired. Turn on as many burners as required. The
top cover may be closed during grilling. Keep the top cover in closed position during
the pre heat period.
Rotisserie: Turn the control knobs to HI.
14
Summary of Contents for SS27PRO
Page 19: ...19 ...
