Summerset SSIM-15, User Manual

22

ICE MAKER USER MANUAL

ICE MAKER USER MANUAL

23

CLEANING AND MAINTENANCE

MAJOR FUNCTIONS

CONTROL PANEL

Description of LEDs and buttons:

1.  Bin Full (Red) LED: Bin full indicator light 

When this is lit, the ice storage bin is full 

of ice or there is something blocking the 

bin-full probe. The unit will stop working. 

When ice cubes are removed from the ice 

storage bin, freeing the bin-full probe, the 

red LED will remain flashing for 3 minutes, 

then the unit will restart and return to the 

ice making mode.

2.  Ice Making (Green) LED: Ice making indicator light 

When this is lit, the unit is working in the ice making mode controlled by a temperature probe on the 

evaporator. When the green LED flashes, the unit is working in the ice making mode controlled by a 

fixed timer.

3.  Ice Harvest (Yellow) LED: Ice harvest indicator light 

When this is lit, the unit is working in the ice harvest mode controlled by the ice-full probe.

4.  Mode button: Mainly for service  

When this is pressed, the ice making mode changes to the ice harvest mode or vice versa. The mode 

can be judged from the status of the green and yellow LEDs.

5.  Adjust button: Mainly for service.  

When it is pressed over 3 seconds, the unit will enter the Ice Size Adjustment mode. The mode can be 

judged from the status of the yellow LEDs.

+

_

ICE SIZE ADJUSTMENT GUIDE

1.  Press and hold the “Adjust” button for at least 3 seconds. The unit will enter the Ice Size Adjustment 

mode. The “HARVEST” LED (yellow) will be blinking continuously during the ice size adjustment. Release 

the button when the LED blinks continuously to adjust the ice size.

2.  While in the Ice Size Adjustment mode, press the “Clean” (-) button or the “Mode” (+) button for the 

desired ice size.

Smaller Ice Setting:

By pressing the “Clean” (-) button, you can decrease the size of the ice cubes. The “ICE” LED (green) will 

flash as you lower the ice size and will finally be blinking at the setting of smallest ice size.

Larger Ice Setting:

By pressing the “Mode” (+) button, you can increase the size of the ice cubes. The “BIN FULL” LED (red) will 

flash as the larger size is set and will blink when the setting of largest ice size has been reached. 

After 10 seconds without any operation, the unit will return to the previous mode.

NOTE:

•  If during the ice size adjustment mode the “BIN FULL”, “ICE” and “HARVEST” LEDS blink all at once, this 

indicates that the unit is in the regular (middle) setting of the ice size.

•  When the machine is in the cleaning stage or ice full stage, the ice size adjustment mode cannot be 

accessed.

1. The operating procedure is completely automatic.

2.  When the ice storage bin is full of ice cubes, the machine stops making ice automatically. It starts 

making ice again after ice cubes are removed.

3. The different colors of the LED display indicate various work modes.

4. A sensitive probe and accurate timer enhance the performance of the ice maker.

5. A compressor protection system is built in.