Factory-set default password:
The factory-set default password is 0123. If the
default password is lost, press the
key (located inside
the battery box) for 30 seconds, then wait for the warning
sound which signifies the factory-set default password has
been restored.
To set the password:
While door is open, press the
key (located inside the battery box) until it jingles,
enter the 0123 password, then # within 10 seconds to
confirm. Enter the password (1-16 digits), then press # again to confirm. A
total of 10 passwords can be set.
Note:
Each password starts with a number from 0 to 9 in order. The first password
starting with 0 is the default password. For example, use 1xxx, then 2xxx
etc. for 10 users.
Changing password:
While the door is open, press the
key (located
inside the battery box) until it jingles, enter the old password and press #
within 10 seconds to confirm. Enter the new password, then press # to
confirm.
Note:
The first digit cannot be changed.
To open the door:
While the door is closed, press the
key, enter the
password, then press
again to confirm.
To lock door manually:
Press #.
Function setting of automatic lock:
Setting of the auto-lock time: Press the
key (inside the battery box), enter a number (any number between 10-
99), then press # to confirm. The auto-lock time can be set between 10-99
seconds after opening the door. If the time is set less than 10 seconds, the
door will not lock automatically, only manually.
Deleting the door-opening passwords:
Press the
key, enter default
password followed by 0000, then press # and all the door-opening passwords
will be deleted except for the default password.
Note:
To access the battery box you need to remove only the two small
screws on the top and bottom of that cover. Do not remove the 4 screws
holding the keypad and cover to the appliance door.
KEYPAD LOCK
(Optional on most models)
Felix Storch, Inc.
Page 12
