4
Technical Information
Model Numbers
BRF65S2
ADA65S2
BAR63S2
ADA63S2
AR5SB
AR5BIF
BAR61W2
ADA61W2
Type
Refrig-freezer
All-refrigerator
All-refrigerator
Exterior
Black w SS door
Black w SS door
(panel-ready on
–IF)
White
Capacity
5.1 cu. ft.
5.5 cu. ft.
5.5 cu. ft.
Electrical Input
115V AC/60Hz
115V AC/60Hz
115V AC/60Hz
Rated Current
1.4A
1.4A
1.4A
Temperature
of Freezer
5°F
--------
-------
Refrigerant
R600a, .92oz.
R600a, .64oz.
R600a, .64oz.
Installation
Built-in or Free-
standing
Built-in or Free-
standing
Built-in or Free-
standing
Ship Weight
102 lbs.
102 lbs.
102 lbs.
Unit Dimensions
(W x D x H)
23.63" x 23.5"
x 33.25" *
23.63" x 23.5"
x 33.25" *
23.63" x 23.5"
x 33.25" *
NOTES:
* “ADA” models have a 32” height to fit under lower ADA-compliant counters.
Specifications are subject to change without notice.
Installation Instructions
Before Using Your Appliance:
Remove the exterior and interior packing.
Before connecting the unit to a power source, let it stand for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling
during transportation.
Remove the crisper, drip tray and shelves and clean them and the interior surfaces of
the unit with lukewarm water using a soft cloth.
Installing Your Appliance:
Place the unit on a floor that is strong enough to support the appliance when it is fully
loaded. To level the unit, adjust the two leveling legs at the front.
These models are designed to be built-in, but can also be used free-standing. For
built-
in installation, keep ¼” (6.35mm) of space on each side and at the top and 2”
(51mm) at the rear. Take care that the air vent at the front of the appliance is never
covered or blocked in any way
.
Summary of Contents for ADA61W2
Page 28: ...24 Notes 25 ...
Page 29: ...25 Notes 26 ...
