MPE-200 Guide to Operations
Page 11
3.3
INPUT SETUP screen (yellow).
Chan A phantom power on
Chan B phase inverted 180
°
Mic preamp selected to feed EQ input
This screen controls 48v. phantom power on or off for each
channel; phase + or – for each channel; Mic or Eq input to both Eq
channels. Push the knob to select the desired function; rotate the
knob to modify the setting.
•
An open circle ind48v is off; a filled circle is +48v on.
•
The minus sign (-) means the Mic Pre phase is inverted.
•
The input selection (Mic or Eq) selects what is feeding the Eq.
The input selection and phase are retained if the power is cycled,
but the phantom power settings are not saved and default to off as
a safety feature.
When
Mic In
is selected, the output of each preamp is routed to
the corresponding Eq input; if
Eq In
is selected, the inputs on the
back of the MPE are routed to the Eq. Both channels are switched
together. The direct outputs of the Mic preamps are always live.
This allows the MPE-200’s preamps and Eq's to be used
separately. If
Eq In
is selected, you can also insert external
equipment such as compressors between the Mic Pre outputs and
Eq inputs of the MPE.
48
+
Ph
-
Mic In
