Page 16
MPE-200 Guide to Operations
5.4
MASTER SETUP screen (yellow).
Presets A and B unlocked
2 channel mode selected,
Fader disabled
Master Setup functions include preset locking, channel mode, and
fader enable. Press the encoder knob to select the desired function
and turn the knob to change the parameter.
Preset Locking
To lock and unlock presets, turn the encoder knob while the lock
icon is blinking. Press the encoder knob to select either channel. If
Stereo mode is selected or if presets A and B are identical, both
lock icons will be selected.
When a preset is changed from locked to unlocked, changes made
while it was locked will NOT be stored; only changes made while
the preset is unlocked will be stored in the preset memory.
Channel Mode
The channel mode controls the basic configuration of the MPE-
200. When set to Stereo, all the Eq controls operate equally on
both channels. The Mic gains can still be set separately, but both
gains are part of a single preset. See Section 3.1 for details. When
the channel mode is set to 2-Chan, each of the A and B channels
has its own Eq and gain settings, stored in separate presets.
To adjust the channel mode, turn the encoder knob while the
Stereo / 2-Chan icon is blinking. When changing from 2-Chan to
Stereo mode, channel B inherits the current settings of channel A,
even if either or both presets are locked.
The channel mode is not part of the preset memory and is not
affected by the lock state, but is saved when power is turned off.
2-Chan
NoFade
