background image

 

 

 

 

Electrical Connection

 

 
 
 
 
 

 

This appliance should be properly grounded for your safety.  The power cord of this appliance is 
equipped with a three-prong plug which mates with standard three-prong wall outlets to minimize the 
possibility of electrical shock. 
 
Do not under any circumstances cut or remove the third (ground) prong from the power cord 
supplied. For personal safety, this appliance must be properly grounded. 
 
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. 
Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly 
grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation 
to have it replaced with a properly grounded 3-prong wall outlet.  
 
To prevent accidental injury, the cord should be secured behind the appliance and not left exposed 
or dangling. 

 

The appliance should always be plugged into its own individual electrical outlet which has a voltage 
rating that matches the rating label on the appliance. This provides the best performance and also 
prevents overloading house wiring circuits that could cause a fire hazard from overheating. Never 
unplug the appliance by pulling on the power cord.  Always grip the plug firmly and pull straight out 
from the receptacle. Repair or replace immediately all power cords that have become frayed or 
otherwise damaged. Do not use a cord that shows cracks or abrasion damage along its length or at 
either end. When moving the appliance, be careful not to damage the power cord. 

 

Extension Cord

 

Because of potential safety hazards under certain conditions, it is strongly recommended that you do 
not use an extension cord with this appliance. However, if you must use an extension cord it is 
absolutely necessary that it be a UL/CUL-Listed, 3-wire grounding type appliance extension cord 
having a grounding type plug and outlet and that the electrical rating of the cord be 115 volts and at 
least 10 amperes. 
 
 
 
 
 
 
 
 
 

 WARNING

 

Improper use of the grounded plug can result in the risk of electrical shock. If the power cord 
is damaged, have it replaced by a qualified electrician or an authorized service center. 

 

 

Summary of Contents for FF616TD

















Reviews: