Summit Commercial SCFF236, User Manual

7 

INSTALLATION 

IMPORTANT!      PLEASE READ BEFORE INSTALLATION



If the unit has recently been transported, let it stand upright for a minimum of 
24 hours before plugging it in. 



Be sure there is proper ventilation around the unit in the area where it will 
operate. 

Leave at least 8” at the back. 



Make sure all accessories are installed (i.e. shelves, shelf clips, casters) 
before plugging the unit in. 



Be sure the unit has dropped down to desired temperature before loading it 
with product. 



Please read through the manual in its entirety.   

Cabinet Location Guidelines: 



Install the unit on a strong and level surface. 

–

Unit may make unpleasant noises if surface is uneven. 

–

Unit may malfunction if surface is uneven. 



Install the unit in a well-ventilated indoor area. 

–

Unit performs more efficiently in a well-ventilated area. 

–

For best performance, maintain a clearance of 8" at the back of the unit. 

–

Outdoor use may cause decreased efficiency and damage to the unit. 



Avoid installation in a high humidity and/or dusty area. 

–

Humidity could cause unit to rust and experience decreased efficiency. 

–

Dust collected on the condenser coil will cause the unit to malfunction. 
Clean the condenser at least once a month with a brush or clean cloth. 



Select a location away from heat and moisture-generating equipment. 

–

High ambient temperatures will cause the compressor to overwork, leading 
to higher energy bills and gradual breakdown of the unit. 

Electrical Connection: 



Be sure the required compressor voltage is being supplied at all times. Low or 
high voltage can detrimentally affect the refrigeration unit. 



All units should be plugged into a grounded and properly-sized electrical outlet 
with appropriate overcurrent protection. Refer to the electrical requirements on 
the nameplate.   



Be sure the unit has its own dedicated outlet.   



Do not use an extension cord.