8
USA
Place the two mounting brackets into the top
corners of the dishwasher.
Fix the mounting brackets (
A
) to the top corners of
the dishwasher, with the screws supplied.
Bend sides of mounting brackets (
B
) in order to fix
from sides (if necessary).
6.3 ADJUSTING HEIGHT
If the height of the enclosure is 337/8” to 357/8”
(861 mm - 911mm) adjust supports as shown in
the figure.
Supplied (
4
)
Adjust the front foot level with the adjusting
wrench to balance and raise the dishwasher to the
enclosure height.
Adjust the rear foot level with a screwdriver to
balance and raise the dishwasher to the enclosure
height.
NOTICE :
• Make sure the dishwasher is plumb and
notice dishwasher can be placed with a small
clearance under the counter top.
• Turning the screwdriver in the direction of the
black arrows will bring the dishwasher back
feet up.
• Turning the screwdriver in the direction of the
white arrows will take the dishwasher rear feet
down.
Summary of Contents for DW18SS3
