14
USA
7.2 READJUSTING FOOT
LEVELS
Now that the dishwasher is in the
cabinet you must readjust the
feet to bring the dishwasher up to
the required height and attach it
underneath the countertop.
1. Readjust the front foot levels with
adjusting wrench to balance the
dishwasher and raise it up under the
countertop, make sure the unit is
level.
2. Readjust the rear foot levels
with a screwdriver to balance the
dishwasher and raise it to the
required height using the brackets
supplied.
3. Attach the dishwasher underneath
the countertop with the four screws
supplied (Ø 1/8” x 1/8” - Ø 3.5mm
x 14mm). Make sure you do not go
through the top of the countertop or
damage granite.
7.3 ADJUSTING THE MOVABLE TOE KICK
Now that you have successfully installed the dishwasher, you need to
attach the toe kick to the dishwasher. The two piece toe kick can be
adjusted to the height and depth needed for your kitchen. Be sure to
use the slotted toe kick in the front and the other behind it. They slide
into each other.
1. Insert the movable toe kick brackets into the channel (
A
).
2. Make sure that the plastic tab to the left of the “L” opening on the
dishwasher has not closed the channel you will push the bracket
through.
NOTICE :
Be sure to notice there is a left and a right bracket.
Adjust the toe kick brackets forward or backwards so that they will
align with the kitchen toe kick (
B
).
Summary of Contents for DW18SS3
