23
USA
C
The machine will remain
silent in pause mode for
some time in order to
remove the water from the
machine and on the dishes
completely and to have the
water softener cleaned, and
then it will resume running in
drying mode.
6.7 CANCELLING THE
PROGRAMME
Open the door of the product Press
and hold the Programme Selection
/ Programme Cancel keys for 3
seconds. After the 3 - 2 - 1 countdown,
0:01 is displayed, close the door of
the product and wait for the draining
process complete. Draining is
completed in 2 minutes and the
machine gives an audible warning
when it is completed.
C
There might be residues
of detergent or rinse aid
in the machine and/or on
the pieces being washed
depending on the step
the programme you have
cancelled was in.
6.8 SALT INDICATOR ( )
(MODEL DEPENDING)
Please check the salt indicator on
the display to see whether there is
adequate amount of softening salt
in the dishwasher or not. You need
to refill the salt reservoir with salt
whenever salt indicator appears on the
display of your machine.
C
Adjusting the water hardness
level is explained in Water
Softening System section.
6.9 RINSE AID INDICATOR ( )
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears
on the display of your machine.
6.10 END OF PROGRAMME
C
When the programme you
have selected comes to an
end, an audible warning
signal will warn you to turn
off your machine. This
audible signal will warn you
with certain intervals before
it turns off.
End of Programme indicator will light
up when the washing programme is
over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the
socket.
C
For energy saving, the
machine is automatically
turned off following
the completion of the
programme or if the
programme is not started.
