background image

Key Lock 

If no key is touched for 2 minutes, the controls will be locked automatically. To release the lock, 
touch the 

  and   symbols at the same time for at least 3 seconds. 

 

Setting the Temperature Control 

You can choose between Fahrenheit and Celsius for the temperature display by touching the 

 

symbol.  A Fahrenheit or Celsius degree indicator will appear next to the temperature display 
window. You can set the temperature by touching the

 UP 

and

 DOWN 

symbols. 

  The temperature you are setting will increase by one degree each time you touch the 

UP

 

symbol, and will decrease by one degree each time you touch the 

DOWN

 symbol. 

  When you store mostly red wines, the temperature should be set at 58º - 72ºF (15º - 22ºC) and 

the LED lamp       for RED will be lit red. 

  When you store mostly white wines, the temperature should be set at 48º -  57ºF (9º - 14ºC) and 

the LED lamp        for WHITE will be lit green. 

  When you store mostly sparkling wines, the temperature should be set at 40º - 47ºF (5º - 8ºC) 

and the LED lamp       for SPARKLING will be lit amber. 

  The temperature inside the unit will appear in blue in the display window.

 

 
 

NOTE: 

 

If the unit is unplugged, or power is lost or turned off, you must wait 3 to 5 minutes before 
restarting the unit. If you attempt to restart before this time delay, the unit will not start. 

 

When you use the unit for the first time or restart the unit after it has been shut off for a long 
time, there could be a few degrees variance between the temperature you select and the one 
indicated on the LED readout.  This is normal and is due to the length of the activation time. 
There should not be a problem once the unit has been running for a few hours.

 

 
 
 
 
 
 
 
 
 

Interior Light 

The unit is equipped with an interior LED light which can be turned ON or OFF by touching the 

 

symbol. 

 
 

 

5-Bottle Arrangement

 

 

3-Bottle Arrangement

 

STORAGE 

Bottles can differ in size and dimensions. As such the actual number 
of bottles you may be able to store can vary. 
 
You can place 33 standard bottles in this model with 5 bottles on each 
full-size shelf and 3 bottles on the bottom half-size shelf. Bottle 
capacity is at its optimum when storing traditional 750-ml Bordeaux 
bottles. 
 
 

DOOR LOCK 

Your unit is provided with a lock and key combination. 

The keys are located inside the plastic bag that contains the Owner’s Manual. Insert the key into the lock 
and turn it counterclockwise to unlock the door. To lock the door, do the reverse operation, making sure 
the metal pin is engaged completely. Remove the key and place it in a secure place for safekeeping. 

 

 

 

9

Summary of Contents for SWC1535













Reviews: