11
Using your Cooktop
1. Place a pan on the cooking zone you wish to use. Make sure the cooking surface and the bottom
of the pan are clean and dry.
2. Press and hold the ON/OFF key for two seconds. The cooktop will alert you with a single beep
once it has powered on. The display will show “0” indicating the selected cooking zone has
entered standby mode.
3. Press the appropriate cooking zone key, based on the location of your pan. The “0” displayed
will flash.
4. Adjust the power to accommodate your desired heat setting. The heat setting can be adjusted at
any time during cooking.
NOTE:
If you do not choose a power/heat setting within 20 seconds, the cooking zone will power off
and you will need to start again at step 2.
Using the Timer
The timer function will automatically power off the selected cooking zone after the set time has
elapsed. The timer can be set for up to 99 minutes (1 hr. 39 mins.).
1. Press the zone select key to activate the appropriate cooking zone.
3. Use the
+
and
–
keys of the Power/Timer Setting to set the desired time.
• To check the remaining time, press the appropriate zone key, then the timer key.
• If you do not select a cooking zone before setting the time, the timer will operate as a minute
minder, producing a beep once the time has elapsed.
Using the Child Lock
The cooktop can be locked to prevent unintended use, such as children accidentally powering the
cooktop on. When the child lock is enabled, all of the controls except the OFF key.
To Lock the Controls
To Unlock the Controls
