background image

32

33

Belt-Positioning Booster Use

Lap/Shoulder Belt

Refer to the “Choosing
Restraint and Position”
section to make sure
your child is at the
proper weight and
height to use the belt-
positioning booster.

WARNING

!

Loose LATCH hooks can result in serious
injury or death.

Do not use LATCH
when using the Belt-
Positioning Booster.

You MUST fasten the
LATCH belt hooks
together behind seat.

When your child is over
40 lbs. (18.1 kg) or 43”
(110.1 cm) and over 1
year old, you must use
this seat as a belt-
positioning booster.

Belt-P

ositioning Booster Use:

40-100 lbs.

(18.1-45.4 kg),

43-52” (110.1-132.1 cm),

Ov
er 1 y

ear of age

.

Style 3 - 

To Attach Top

Anchorage Strap:

Put knee in child restraint

and push down; attach

hook to anchor in vehicle.

Pull loose
end to
tighten

To Adjust Top
Anchorage Strap:
To tighten; pull on free end
of top anchorage strap.

Lift up to
loosen

To loosen; lift up on top
anchorage lock and push
lock toward top anchorage
hook.

WARNING

!

You must follow the threading diagram
exactly. Failure to follow these steps could
cause the strap to loosen in a crash, which
can result in serious injury or death.

3

2

1

4358-3412E Summit  3/2/07  2:55 PM  Page 35

Summary of Contents for Deluxe Highback Booster 4358-3412E

























Reviews: