Chapter 5
Configuring VLANs
49
2. Use the
ifconfig(1M)
to configure a VLAN virtual device, for example:
The output of
ifconfig -a
on a system having VLAN devices
ce123000
and
ce224000
:
3. On the switch, set VLAN tagging and set VLAN ports to coincide with the VLANs
you’ve set up on the server. Using the examples in Step 2, you would set up VLAN
ports 123 and 224 on the switch.
Refer to the documentation that came with your switch for specific instructions for
setting VLAN tagging and ports.
# ifconfig ce123000 plumb up
# ifconfig ce224000 plumb up
# ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
hme0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 129.144.131.91 netmask ffffff00 broadcast 129.144.131.255
ether 8:0:20:a4:4f:b8
ce123000: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 199.199.123.3 netmask ffffff00 broadcast 199.199.123.255
ether 8:0:20:a4:4f:b8
ce124000: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 4
inet 199.199.124.3 netmask ffffff00 broadcast 199.199.124.255
ether 8:0:20:a4:4f:b8
Summary of Contents for 806-2989-10
