Feature
Description
Chassis midplane I/O
Depending on your server model, each node supports either a 1GbE or 10GbE
interface through the chassis midplane to the NEM.
Note –
Although a supported NEM might include both 1GbE and 10GbE ports,
the server module only supports one interface type.
■
One (x8) PCIe 2.0 bus connection per node to a chassis PCIe EM slot. Node
0 is assigned to chassis blade PCIe EM slot 1, node 1 is assigned to chassis
blade PCIe EM slot 0.
■
One 10/100/1000Base-T Ethernet port per node with the 1GbE model
(X6275M2–BB). The port for node 0 is assigned to a supported NEM in
chassis slot NEM0, the port for node 1 is assigned to an supported NEM in
chassis slot NEM1.
■
One 10GbE port per node with the 10GbE model (X6275M2–CB). The
port for node 0 is assigned to a supported NEM in chassis slot NEM0, the
port for node 1 is assigned to an supported NEM in chassis slot NEM1.
CPU
Up to four Intel Xeon Processor E5600 Series six-core processors per server
module (two per node). Twelve cores per node, for a total of twenty–four cores
per server module.
Note –
Both nodes of the server module must be configured identically (CPUs
and memory).
Dual-node design
Two independent, symmetric compute nodes, 0 and 1, in a single blade
enclosure.
Front panel I/O
Two Universal Connector Ports (UCP), one per node, are available for use with
the multi-port (dongle) cable. The multi-port cable provides the following
interface connections:
■
VGA graphics port.
■
RJ-45 serial management port.
■
Dual USB ports (keyboard/mouse/USB drive).
Memory
■
Twenty-four memory slots total (12 slots per compute node). Slots support
up to 1333 MHz low voltage DDR3, ECC registered, DIMMs.
■
Up to 96 GB of main memory per node using 8 GB DIMMs.
■
Up to 48 GB of main memory per node using 4 GB DIMMs.
■
Up to 2 DDR3 DIMMs per channel, 3 channels per installed processor.
Note –
Both nodes of the server module must be configured identically (CPUs
and memory).
Product Features
13
