Administering Driver Parameters and Jumbo Frames
49
Related Information
■
“Driver Parameters (Oracle Solaris OS)” on page 44
■
“Set Driver Parameters (Oracle Solaris OS)” on page 45
■
“Change the MTU Permanently” on page 48
■
“Change the MTU Temporarily (Oracle Solaris 11)” on page 49
▼
Change the MTU Temporarily (Oracle Solaris 11)
●
Use the
dladm
(1M) command to increase MTUs to allow transmission of jumbo
frames.
For example, where the device name is
ixgbe0
, the following command increases
MTUs to the maximum:
The temporary setting lasts only until the next reboot of the server.
Related Information
■
“Driver Parameters (Oracle Solaris OS)” on page 44
■
“Set Driver Parameters (Oracle Solaris OS)” on page 45
■
“Change the MTU Permanently” on page 48
■
“Change the MTU Temporarily (Oracle Solaris 10)” on page 48
#
dladm -t mtu=15500 ixgbe0
Summary of Contents for E25544-02
