57
Configuring VLANs
These topics describe how to configure VLANs in the Oracle Solaris 10 OS. For
instructions on how to configure VLANs in the Oracle Solaris 11 OS, refer to
Oracle
Solaris Administration: Network Interfaces and Network Virtualization
in the Oracle
Solaris 11 documentation library.
Note –
If you change any of the VLAN configuration parameters, you must reboot
the system before the changes take effect. If you make changes and do not reboot,
you might experience configuration problems.
Related Information
■
“Understanding the Installation Process” on page 1
■
“Understanding the Adapter” on page 7
■
“Installing the Driver” on page 17
■
“Installing the Adapter” on page 25
■
“Configuring the Network” on page 33
■
“Administering Driver Parameters and Jumbo Frames” on page 43
■
“Configuring Link Aggregation” on page 51
■
“Troubleshooting the Adapter” on page 67
Description
Links
Understand VLANs.
“VLAN Overview” on page 58
“VLAN Configuration” on page 61
“VLAN Naming Format” on page 61
Configure VLANs.
“Configure Static VLANs (Oracle Solaris 10)” on page 62
“Configure VLANs (Linux)” on page 63
“Configure VLANs (Windows)” on page 64
Summary of Contents for E25544-02
