74
Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
7. Use the
test
command and the device paths found in
Step 6
to test the adapter
when you use the FCode self-test.
The structure of the
test
command line includes the following device parameters:
where:
s
=
1000, 100, 10, auto
d
=
half, full, auto
c
=
master, slave, auto
Note –
The
speed
,
duplex
, and
link-clock
parameters are optional tests.
The following default tests are run when you execute the
test
command:
■
Tests six groups of Ophir registers (You can see the names of the six groups in the
output sample shown on the following page.)
■
Internal loopback test for the UTP card and external loopback test for the MMF
card.
■
10 Mbps PHY loopback.
Refer to the appropriate
OpenBoot Command Reference Manual
for more information
about the
test
command.
ok
test
device-path
:
speed=
s
,duplex=
d
,link-clock=
c
,promiscuous,
