28
Sun PCI-Express Dual Gigabit Ethernet MMF/UTP Adapter Installation and User’s Guide • June 2006
■
unit-address
=
"1"
2. Set the parameters for the
ipge
devices in the
/kernel/drv/ipge.conf
file.
In the following example, the
adv_autoneg_cap
and
adv_1000fdx_cap
parameters are set for all Sun PCI-Express Dual Gigabit Ethernet devices. See the
driver.conf(4)
man page for more information.
In the following example, the
adv-autoneg-cap
and
adv-1000fdx-cap
parameters are set for a single instance of the
ipge
device.
Note –
If you omit the
name=
,
parent=
, and
unit-address=
definitions, the
settings become global to all Sun PCI-Express Dual Gigabit Ethernet instances.
3. Save the
ipge.conf
file.
Link Partner Parameters
TABLE 3-1
describes the read-only link partner capabilities.
adv-autoneg-cap=0 adv-1000fdx-cap=0;
name="pciex8086,105f" parent="/pci@7c0/pci@0/pci@2/network@0" unit-address="1"
adv-autoneg-cap=0 adv-100hdx-cap=0 adv-100fdx-cap=1 adv-1000fdx-cap=0 adv-
10hdx-cap=0 adv-10fdx-cap=0 adv-1000hdx-cap=0 adv-100T4-cap=0;
TABLE 3-1
Read-Only Link Partner Capabilities
Parameter
Description
lp_cap_autoneg
0 = No autonegotiation
1 = Autonegotiation
lp_cap_1000fdx
0 = No 1000 Mbit/sec full-duplex transmission
1 = 1000 Mbit/sec full-duplex
lp_cap_1000hdx
0 = No 1000 Mbit/sec half-duplex transmission
1 = 1000 Mbit/sec half-duplex
lp_cap_100fdx
0 = No 100 Mbit/sec full-duplex transmission
1 = 100 Mbit/sec full-duplex
