Chapter 4
Replacing Cold Swappable FRUs
73
1. Press the Top cover release button (
FIGURE 4-3
).
FIGURE 4-3
Top Cover and Release Button
2. While pressing the top cover release button, slide the cover toward the rear of the
server about half of an inch.
3. Lift the cover off the chassis.
▼
To Remove the Front Bezel and Top Front Cover
The following field-replaceable units (FRUs) require the removal of the top front
cover and front bezel:
■
Motherboard
■
SAS disk backplane
■
LED board
■
Front I/O board
■
Fan power board
■
DVD
1. Remove the top cover as described in the previous procedure.
2. Lift the fan cover latch (
FIGURE 4-3
) and open the fan cover.
3. Loosen the captive screw (near the right-most fan) that secures the bezel to the
chassis (
FIGURE 4-4
).
Fan
cover latch
Top front cover
Fan cover
Top cover
Top cover release button
Summary of Contents for Netra T2000
