10-1
C H A P T E R
10
System Board Overview
This chapter describes precautions you should take when handling the system
board. It also shows the layout of the system board and identifies the replaceable
components of the system board.
■
“Damage Prevention” on page 1
■
“Handling System Boards and Assemblies” on page 1
■
“System Board Layouts” on page 2
■
“Replaceable System Board Components” on page 3
10.1
Damage Prevention
Caution –
Use an antistatic mat when working with the system board. An antistatic
mat contains the amount of cushioning needed to protect the underside components,
to prevent board flexing, and to provide antistatic protection. Part numbers for
antistatic mats from Sun Microsystems are listed in Chapter 12.
10.2
Handling System Boards and
Assemblies
Caution –
The system chassis power switch must be set to Standby, and the AC
power cord must remain plugged in to ensure a proper ground.
Summary of Contents for SPARCstation 4 110
