B-16
Sun StorEdge SBus Dual Fibre Channel Host Adapter Installation Guide • October 2002
3. Enter the partition ID tag.
The following example shows a question mark (?) entered after the prompt. The list
of accepted partition ID tags is displayed. You can accept the default partition ID tag
of root by pressing the Return key.
4. Type the partition permission flags.
You can accept the default permission flags wm by pressing the Return key.
5. Type the new starting cylinder.
You can accept the default new starting cylinder of
0
accepted by pressing the
Return key.
6. Type the partition size.
The following example shows the partition size of
2.00gb
entered.
Enter partition id tag[root]: ?
Expecting one of the following: (abbreviations ok):
unassigned boot root swap
usr backup stand var
Enter partition id tag[root]:
Enter partition permission flags[wm]:
Enter partition permission flags[wm]:
Enter new starting cyl[0]:
Enter new starting cyl[0]:
Enter partition size[262899b, 91c, 128.37mb, 0.13gb]:
Enter partition size[262899b, 91c, 128.37mb, 0.13gb]: 2.00gb
partition>
Summary of Contents for StorEdge
