Installation Procedure
31
8. Attach the “B Power Grid” labels from the label set to all four AC power supply
cable assemblies (
a. Attach the individual label to some spare backing paper.
b. Attach the clear adhesive over the label so that the white tab does not obscure
any part of the label.
c. Remove the assembled label from the backing paper and attach it to the correct
position on the cable assembly.
Note –
“A Power Grid” labels are also provided and may be applied to the existing
four AC power supply cable assemblies in the same location as shown for “B Power
Grid” in
FIGURE 16
AC Power Supply Cable Assembly Labels
B
POWER
GRID
B
POWER
GRID
B
POWER
GRID