Chapter 4
Command-Line Reference
4-121
4.3.12.1
vlan database
Use this command to enter VLAN database mode. All commands in this mode will
take effect immediately.
Default Setting
None
Command Mode
Global Configuration
Command Usage
■
Use the VLAN database command mode to add, change, and delete VLANs.
After finishing configuration changes, you can display the VLAN settings by
entering the
show vlan
command.
■
Use the
interface vlan
command mode to define the port membership
mode and add or remove ports from a VLAN. The results of these commands
are written to the running-configuration file, and you can display this file by
entering the
show running-config
command.
Example
Related Commands
show vlan
(
4-130
)
4.3.12.2
vlan
Use this command to configure a VLAN. Use the
no
form to restore the default
settings or delete a VLAN.
Console(config)#
vlan database
Console(config-vlan)#
Summary of Contents for Sun Fire B1600 Administration
