Chapter 3
Installing the System Chassis In a Rack or Cabinet
3-11
3.2
Installing the System In a Two-Post Rack
This section contains instructions for installing a Sun Fire B1600 blade system chassis
into a non-specific two-post rack. These instructions are for both 19 -inch and
23 -inch rackmount options.
The system chassis is shipped with orange sacrificial lifting handles for handling the
system chassis. The handles must be stored in a safe place after the system chassis is
installed in a rack or cabinet.
Note –
The figures in this section are simplified to show only those rails to which
the system chassis rack brackets are attached.
3.2.1
Contents of the Two-Post Rackmount Kit
The two-post rackmount kit comprises:
■
The Rack Buddy
■
Four rackmount brackets
■
One set of 10-32 UNF Sun Microsystems rackmounting screws for Sun racks
You must supply the appropriate screws to attach the brackets to any rack not
supplied by Sun Microsystems.
Summary of Contents for Sun Fire B1600 Administration
