5-4
Sun Fire B1600 System Chassis Hardware Installation Guide • August 2003
2. Confirm that the PSU LEDs are in the correct state.
If the PSU fans run at high speed and the blue and amber LEDs are lit on the PSU,
the unit might not be fully inserted into the system enclosure. See
“Removing and Installing a PSU” on page 4-8
for details of how to install the PSU
correctly.
Caution –
Do not attempt to install a PSU with the power cord attached.
3. Use the power cord retention clip to hold the power cord in position (
).
FIGURE 5-3
Clipping on the Power Cord Retention Clip
4. Repeat
through to
for the other PSU.
Summary of Contents for Sun Fire B1600 Administration
