5-12
Sun Fire B1600 System Chassis Hardware Installation Guide • August 2003
5.7
Managing Cables for Multiple System
Chassis
A Sun Fire B1600 blade system chassis that uses every available connection has
22 cables (including power cords) attached to the back of the system. When multiple
system chassis are installed within the same rack you must use effective cable
management to avoid blocking airflow through the system chassis.
Check that:
■
Cables are of an adequate length
■
There is adequate clearance at the back of the system chassis
■
The cabling from multiple system chassis does not block the back vents of any
system chassis that is installed beneath them
Cable management rings are attached to the module ejector handles on each PSU
and SSC. Use each ring to gather the cables from each module and to keep them
clear of the back system vents (
FIGURE 5-8
Back Cable Management Rings
PSU cable
management rings
SSC
cable
management rings
Summary of Contents for Sun Fire B1600 Administration
