3-14
Sun Fire B1600 System Chassis Hardware Installation Guide • August 2003
4. Hold the system chassis up to the rack and attach the front brackets (
FIGURE 3-11
Attaching the Front of the System Chassis to the Rack
(19- Inch, Two-Post Rack)
Caution –
A fully populated system chassis weighs 99 lb (45 kg) approximately and
must be lifted by at least two people. A third person is required to attach the front
brackets to the rack.
Note –
The two inner rack bracket screw holes are the rackmount holes identified
by the Rack Buddy. See
Section 3.1.2, “Using the Rack Buddy” on page 3-2
.
Inner rack bracket
screw holes
Summary of Contents for Sun Fire B1600 Administration
