Chapter 6
Using Sun XVR-4000 Graphics Accelerator Features
51
Checking Device Configuration
Use
fbconfig
to check the X Window system (
-propt
) and the Sun XVR-4000
graphics accelerator (
-prconf
) device configuration values. The
fbconfig -propt
option displays the values of all options (for the specified device) saved in the
OWconfig
file. These are the values the X Window system uses the next time it starts
on that device.
host% fbconfig -dev zulu0 -propt
--- OpenWindows Configuration for /dev/fbs/zulu0 ---
OWconfig File: machine
Card:
Double(wide/high): disable
Stream to Port Mapping: direct (Stream A to Port A; B to B)
Clearpixel Value: 255
Managed Area:
Resolution: SUNW_NTSC_640x480x60
Samples Per Pixel: max
Multisample Mode: forceon
Jitter Table: auto
Video Streams:
Stream A:
Offset (x,y): (0, 0)
Gamma Correction Value: 2.22
Filter Type: mitchell
Stream B:
Offset (x,y): (0, 0)
Gamma Correction Value: 2.22
Filter Type: mitchell
Framelock:
Framelock/Stereo Port: Output from Stream A
Stream A Sync: Free Run (no frame sync)
Stream B Sync: Free Run (no frame sync)