Installing the Solaris Operating System From a JumpStart
Server
Note –
Before you begin, build and place on the JumpStart
TM
server a Solaris image that includes
the Intel Ethernet Drivers (e1000g). The Solaris OS does not include e1000g drivers. For more
information about JumpStart installations, see the
Solaris 10 7/07 Installation Guide: Custom
JumpStart and Advanced Installations
, 819-5778.
▼
Install the Solaris Operating System from a JumpStart
Server
Power cycle the workstation.
Hold down the F8 key until you see the BBS Popup menu.
This menu allows you to select a boot device.
Select a
Network: IBA GE Slot
entry and press Enter.
The network card selected must be connected to the network and be accessible by the JumpStart
server.
Note –
If the network card is properly connected to the network but does not boot, it may be
necessary to configure the network card for booting through the workstation's BIOS
configuration program.
1
2
3
Installing the Solaris Operating System From a JumpStart Server
Appendix A • Installing Linux, OpenSolaris and Solaris OS Remote Images
33