The network card boots and after receiving the correct response from the DHCP server,
displays the Boot Agent message similar to:
Intel(R) Boot Agent PXE Base Code (PXE-2.1 build 0.86)
Copyright(C) 1997-2007, Intel Corporation
CLIENT MAC ADDR 00 14 4F 29 04 12 GUID FF2000008 FFFF FFFF FFFF 7BDA264F1400
CLIENT IP: 10.6.68.29
MASK: 255.255.255.0
DHCP IP:
10.6.68.49
GATEWAY: 10.6.68.1
When prompted, press F12 for a network service boot.
The PXE image menu will be displayed if there is more than one image available.
Select the Solaris image to install, if multiple are listed, and press Enter.
The operating system is installed and the workstation reboots when it is complete.
The following are the log files for the JumpStart installation:
/var/sadm/system/logs/install_log
begin_log
finish_log
sysidtool.log
Install drivers as described in
“Installing Drivers”on page 20
, unless your JumpStart image is
configured to preload the drivers.
4
5
6
7
Installing the Solaris Operating System From a JumpStart Server
Sun Ultra 27 Workstation Linux, OpenSolaris and Solaris Operating System Installation Guide • August 2009,
Revision A
34