Figure 1–4
Attaching the Wrist Strap to the Chassis
5. Remove any long PCI cards and UPA graphics cards (Figure 1–5 and Figure 1–6):
a. Using a number 2 Phillips-head screwdriver, remove the screw securing the
card bracket tab to the system unit chassis.
Caution -
Avoid damaging the connector by not applying force to one end or one
side of the board.
b. Grasping the two upper corners of the card, pull the card straight up from
the slot.
c. Remove the card and place it on an antistatic mat.
10
Sun Ultra 60 Product Note
♦
June 2000, Revision A
