8. Replace any long PCI cards or UPA graphics cards (Figure 1–5 and Figure 1–6).
a. Position the card into the chassis.
b. Lower the card connector so that it touches its associated card slot on the
motherboard.
c. Grasping the two upper corners of the card, push the card straight down
into the slot until the card is fully seated.
d. Using a number 2 Phillips-head screwdriver, replace the screw securing the
card bracket tab to the system unit chassis (not illustrated).
9. Connect the AC power cord.
10. Detach the wrist strap.
11. Replace the side access cover (Figure 1–13).
a. Position the side access cover.
b. Engage the side access cover and the chassis hooks. Push the access cover
towards the system unit front.
22
Sun Ultra 60 Product Note
♦
June 2000, Revision A
